- Thermocouples
-
Resistance thermometers
- with connection head
- Resistance thermometers with explosion proof
-
Special types
- RT with special fittings
- Room resistance thermometers
- RT with hand grip for penetration
- Combination RT (resistance and glass thermometers)
- Average value probe
- Small resistance thermometer for srewing in (compact thermometer)
- Sheathed resistance thermometer with connectorless wires
- Temperature probes with magnet for surface measurement
- Measuring inserts
- Precision resistance thermometer
- Cable sensors
- Cable sensors
-
Components and accessories
- Connection heads
- Thermo junction
- Connector
- Fixing materials
- Extension protecting tubes
- Calibration block
- Miniature fixed-point cell
- Reference junction
-
Transmitter
- Transmitter for TC, 4..20mA
- Transmitter for TC, 0..10V
- Transmitter for Pt100, Pt1000, 4..20mA
- Transmitter for Pt100, Pt1000, 0..10V
- Switching transmitter for Pt100, freely configurable
- Transmitter with LCD-Display
- Analog power supply for transmitters
- Transmitter for TC, DIN-Rail mounting, 4..20mA
- Transmitter for TC, DIN-Rail mounting, 0..10V
- Transmitter for Pt100, Pt1000, DIN-Rail mounting, 4..20mA
- Transmitter for Pt100, Pt1000, DIN-Rail mounting, 0..10V
- Digital thermometer
Cost-effective high-accuracy manual thermometer with a resolution of 0.01°C, controlled by a microcontroller
The DTM 3000 spezial electronic digital thermometer stands out primarily in terms of its very high accuracy, low power consumption, low weight and simplicity of operation. The unit has been designed to provide highly accurate measurements over a temperature range from -20...+110°C. The sensor is permanently connected to the unit and is calibrated together with the latter. If the measurement moves out of range at the top or bottom end "Err2" or "Err1" is displayed respectively.
The unit is switched on by actuation of the on/off button. A segment check is then executed, during which all segments of the display are exercised for few seconds. Two additional buttons provide convenient measurement oprations. With the max/min button the maximum and minimum measured values are stored in each case. If this button is actuated for approx. 3secs the previous values are deleted. The hold button enables the storage of the current maesured value. A serial RS232 interface is installed as standard. The interface cable and the evaluation software can be purchased as optional extras. The DTM 3000 spezial digital thermometer is supplied with an immersion sensor of 2x100mm immersion tube length as standard. For particular measurement problems we can also manufacture cost-effective and customized sensor to your specifications.
* Interface cable and evaluation software must be purchased as optional extras.
Input |
---|
Pt100 permanently connected |
Measuring range |
---|
-20°C ... +110°C |
Resolution |
---|
0.01°C |
Display |
---|
LCD 4-digit, 11mm character height |
Accuracy |
---|
± 0.03°C ± 1 Digit |
Power supply |
---|
9 Volt battery, 6F22 |
Case material |
---|
ABS black |
Weight |
---|
approx. 130g |
Operating temperature range |
---|
0°C ...+70°C |
Features |
---|
Maximum. Minimum, Hold |
Sampling rate |
---|
maximum 1/s (configurable via software) |
Battery operation time |
---|
> 500h at 1/s |
Dimension |
---|
60 x 120 x 26 mm (BxHxT) |
Interface |
---|
RS232* |
USB* |