- Thermocouples
-
Resistance thermometers
- with connection head
- Resistance thermometers with explosion proof
-
Special types
- RT with special fittings
- Room resistance thermometers
- RT with hand grip for penetration
- Combination RT (resistance and glass thermometers)
- Average value probe
- Small resistance thermometer for srewing in (compact thermometer)
- Sheathed resistance thermometer with connectorless wires
- Temperature probes with magnet for surface measurement
- Measuring inserts
- Precision resistance thermometer
- Cable sensors
- Cable sensors
-
Components and accessories
- Connection heads
- Thermo junction
- Connector
- Fixing materials
- Extension protecting tubes
- Calibration block
- Miniature fixed-point cell
- Reference junction
-
Transmitter
- Transmitter for TC, 4..20mA
- Transmitter for TC, 0..10V
- Transmitter for Pt100, Pt1000, 4..20mA
- Transmitter for Pt100, Pt1000, 0..10V
- Switching transmitter for Pt100, freely configurable
- Transmitter with LCD-Display
- Analog power supply for transmitters
- Transmitter for TC, DIN-Rail mounting, 4..20mA
- Transmitter for TC, DIN-Rail mounting, 0..10V
- Transmitter for Pt100, Pt1000, DIN-Rail mounting, 4..20mA
- Transmitter for Pt100, Pt1000, DIN-Rail mounting, 0..10V
- Digital thermometer
DIN rail transmitter LKM 213 for Pt100 / Pt1000 resistance thermometers with output signal 4...20mA
The LKM 213 is an analog transmitter for Pt100 / Pt1000 temperature sensors according to DIN EN 60751. It converts the temperature-dependent resistance signal of the sensors into a standard signal of 4...20mA. The output signal is highly accurate temperature linear. The transmitter is delivered from the factory calibrated to customer specifications. Span and zero controller allows subsequent fine adjustment. The influence of lead resistances is eliminated by using a 4-wire circuit. A larger distance between sensor and transmitter is therefore possible without loss of accuracy. The transmitter can also be used in a 2-/3-wire circuit.
* depends on sensor
Input |
---|
Pt100/Pt1000, 2-/3-/4 wire circuit |
Output |
---|
4...20mA current loop |
Test current |
---|
0.8 ... 1mA* |
Sensor fracture |
---|
>20 mA |
Reaction time |
---|
< 0.1s |
Terminal type |
---|
screw terminal |
Case material |
---|
Polycarbonat |
Weight |
---|
approx. 60g |
Zero point |
---|
-200 °C ... +600 °C* |
Loop voltage |
---|
10...35VDC, reverse protection |
Shorted Sensor |
---|
< 4 mA |
Permissible ripple |
---|
< 10 % |
Vibration |
---|
5g/10-200Hz |
Linearity error |
---|
<0.1% FS |
TCR |
---|
< 100 ppm/°C |
Operating temperature range |
---|
-25 °C ... +85 °C |
Clamping range |
---|
0.2...2.5mm² |
Humidity |
---|
< 95% |
EMC emission |
---|
EN 61000-6-3:2001 |
EMC interference rejection ratio |
---|
EN 61000-6-3:2001 |
Mounting |
---|
35mm DIN rail |
Case |
---|
EMG25-LG |
Case dimension (HxWxD) |
---|
75 x 25 x 53 mm |
Range |
---|
> 20 °C* |